You can switch an external speaker (or two) between the radio and the RRC. You might need a little amplification, depending on the efficiency of the chosen speaker(s). Powered computer speakers should do nicely.
/Rick N6XI Rick Tavan Truckee, CA On Mon, Nov 20, 2017 at 12:31 PM, Fred Jensen <k6...@foothill.net> wrote: > Jorge, > > You said "K3". RemoteRig with a K3 is a bit different than with a K3s or > K3/0. With the K3, the receive audio is on the SP jack on the RRC 1258. > It never gets into the control K3 radio. > > 73, > > Fred ["Skip"] K6DGW > Sparks NV DM09dn > Washoe County > > On 11/20/2017 10:47 AM, Jorge Diez - CX6VM wrote: > >> Hello >> >> I use K3 speaker, I programmed RIT button to switch SPKR+PH to YES and NO >> >> Now I connected Remoterig, and on control radio, I am not able to listen >> to >> K3 speaker >> >> How can I do to listen to K3 speaker, so, to hear K3 speaker when SPKR+PH >> = YES ? >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rta...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com