Vic,
Remember that the P3 IF is tunable from 455kHz to 21MHz.
That means you can tune the P3 to the RWM signal. You will not hear
anything, but you should see the signal on the display and can see how
much it moves.
73,
Don W3FPR
On 12/9/2017 11:51 PM, Victor Rosenthal 4X6GP wrote:
I think that if it were the K3, then I would hear a change in the pitch
of a signal over the first few minutes, and I haven't noticed that.
I think I'm going to do a more careful test: tune to RWM (the Russian
version of WWV, which is good and loud here) and see what the change is
on the K3 and the P3 in the first 15 minutes from a cold start.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
