Hi Bruce,
try to reload the factory data calibration before doing the calibration
with a generator.
Usually it works.
73, Carlo
Carlo Bianconi Telecomunicazioni Official Elecraft Dealer Via O.Trebbi 8/B
40127 Bologna - Italy Ph. 0515878825 mail carlobianc...@iol.it
www.carlobianconi.com
Il 14/12/2017 14:38, Roger D Johnson ha scritto:
Is the S meter supposed to read 60 over 9 when the RF gain is turned
all the way down?
Mine reads 30db!
73, Roger
On 12/13/2017 9:10 PM, Wes Stewart wrote:
I would first perform the RF Gain calibration using the K3 Utility.
The calibration program measures gain characteristics and applies
software correction.
Then run the S-meter calibration.
Wes N7WS
On 12/13/2017 2:25 PM, Bruce Meier wrote:
Looking for suggestions here from someone that might have
experienced this
same issue - -
I have (2) K3 units (not the S model) that are acting different when
the RF
gain adjustments are turned fully counter clockwise.
Ø Unit one – s/n 1062: When the RF gain is decreased to full counter
clockwise position the S-Meter registers full scale (60db over S9) as
expected.
Ø Unit two – s/n 1193: When the RF gain is decreased to full counter
clockwise position the S-Meter registers only S8.
Facts:
Ø With the exception of the S-Meter readings with RF gain settings,
both
units are working fine
Ø Both units have ‘almost’ all mods installed. If not all, they
are at
least both the same.
Ø Both units are running the same version of microcode (5.54)
(2.88) (2.88)
(1.26)
Ø Both units seem to register very close actual RF gain of stations
when
connected when tested on the same antenna
Ø Both units have the new synthesizers.
Ø Both units have second RX
Ø In both cases (both units) I can hear the audio level decreasing
linearly
as expected as the RF gain is turned counter clockwise
I have tried to initialize the K3 and reload the firmware resulting
in no
change to the RF gain / S-Meter readings.
Elecraft Tech Support suggested:
Ø Calibrating the s-meter – did nothing
Ø Next suggestion – send the rig to California.
Anyone have this issue and fixed it??
73,
Bruce N1LN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@roadrunner.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ik4...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com