> I set up the WSTJ software and K3 by following K8ZT's procedure
>
https://docs.google.com/document/d/1-yBKo9Fr1NmwG4AaV0jiI6LbtiMysYGVLPqw2LDG8kM/edit#
The document does not exist. Have you:
1) made sure there is no plug connected to the KIO3B "Line In" jack?
2) selected DATA | DATA A mode?
3) selected MENU:MIC SEL = Line Lin
4) Adjusted the mic gain for 4 to 5 bars of ALC *AFTER* setting
MENU:MIC SEL = Line In?
5) Confirmed that WSJT-X Soundcard Output is set to "Speaker (USB
Audio CODEC) that represents the KIO3B sound card?
6) Confirmed that the Windows Audio Mixer controls for "Speaker
(USB Audio CODEC) that represents the KIO3B sound card is not
muted?
73,
... Joe, W4TV
On 12/22/2017 6:40 AM, n...@n1ix.com wrote:
I have a K3 that I've upgraded to a K3S with the synthesizers and the KIO3B
kit.
I set up the WSTJ software and K3 by following K8ZT's procedure
https://docs.google.com/document/d/1-yBKo9Fr1NmwG4AaV0jiI6LbtiMysYGVLPqw2LDG
8kM/edit#
Receive works great but when I try to transmit a tone using the "tune"
button on the WSTJ software I get the PTT signal of no tone (audio).
I have a feeling that there is a K3 menu that is not set correctly.
Any suggestions would be appreciated.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to li...@subich.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
