Dave,
It is usually the POWER SUPPLY that causes RFI, NOT the monitor. To
verify, leave everything connected but unplug the POWEr SUPPLY from 120VAC
73, Jim K9YC
On 1/10/2018 12:04 PM, Dave S wrote:
I don't think my noise problem with WSJT X is caused by the monitor
because it is still there with the monitor off.
It just almost has to be something about the Elecraft outboard 144 MHz
transverter because I don't have this problem with my TS2000 on 2m.
The mystery is why don't I have the same problem with WSJT 10?
On Wednesday, January 10, 2018 12:06 PM, Jim Brown
<j...@audiosystemsgroup.com> wrote:
As recently as a year ago, I was still seeing Samsung 24-in monitors
running from nominal 14VDC supplies. I already own several, and bought
another to have as a spare. They're 1920 x 1080.
73, Jim K9YC
On 1/9/2018 11:29 PM, Josh Fiden wrote:
> It's a good idea, but too severely limiting since almost all monitors
> now run on 19V. Thus far the HP 23es is fine. I ran RTTY with it next
> to KPA500 on several bands with no issues. Final test will be pointing
> the 6m EME array at the shack and listening. The monitors look really
> good and were on sale at Best Buy for $119!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net>
This list hosted by: http://www.qsl.net <http://www.qsl.net/>
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ionamer...@yahoo.com <mailto:ionamer...@yahoo.com>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
