The Main:Atten setting is for the new 5/10/15 dB attenuator in the K3s
main receiver. Unless you got the new RF board I don't think you have
it. So the Atten setting is fixed at 10 dB. The firmware probably
identifies the old RF board and is trying to tell you that the setting
is N/A for your radio.
Ken K6MR
On 01-Feb-18 20:36:25, "Andy Faber via Elecraft"
<elecraft@mailman.qth.net> wrote:
My K3 came back from being upgraded and seems to have a new menu item,
called ATTEN, with "10db" displayed. When I turn the big knob, it stays
at that value and the secondary display says "N/A". It's not in my
instruction book, nor is it in the online manual I found on the Elecraft
website. Am I missing something obvious, or can someone explain?
73, andy ae6y
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@gmx.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
