Hi Roger, Take a look at your RX equalizer settings. If I remember correctly the DSP will not apply positive DB equalizer settings at a bandwidth setting of 100Hz or 50Hz. So if for example your pitch is set to 600Hz and you have a 6db boost dialed in on your equalizer at 600Hz then when you narrow your bandwidth you will experience a drop in audio level of 6db.
Again, if I remember correctly, the solution is to only apply negative db settings for your CW RX equalizer. So you might drop all frequencies except 600Hz by 6db. Then when you narrow your bandwidth you won't experience an audio level drop. 73, Mike K2MK Roger D Johnson wrote > I noticed that during the contest, that if I selected 50 or 100 Hz > selectivity, > the audio would drop way down. It didn't used to be this way. I tried > reloading > an earlier version of the software but couldn't figure out how to do it. > > Hope this comes through, finally! > > > 73, Roger -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
