Ray, It looks like I'll be calling the parts department for a new encoder. I swapped A & B this morning and now A works and B doesn't. I didn't remember this when I built the thing but there is a surprise waiting for you when you try to remove the front panel. The screws on the left front of the RF board are in the way. I did a quick review of the assembly manual before attempting to remove it and some how I didn't notice this.
It would be really cool if there was a software way to swap the controls A & B. I'm not sure in how many cases this would ever be useful, but this is certainly one case. It has been almost 10 years since the K3 had been apart, when I built it. It is kind of hard to believe that it has been that long! Thanks & 73 de Joseph M. Durnal - NE3R K3 SN 01121 On Sun, Feb 11, 2018 at 9:23 AM, Raymond Sills <raysil...@verizon.net> wrote: > Hi Joe: > > > Well... I'd say a call to Elecraft support is in order. Try tomorrow > afternoon. > > > BTW, this list is set for a reply to BE off-list. Sometimes people forget > that. You have to manually type in the list address to have the response > go to the list. > > > 73 de Ray > K2ULR > KX3 #211 > > > > > -----Original Message----- > From: Joseph M. Durnal <joseph.dur...@gmail.com> > To: Elecraft Reflector <Elecraft@mailman.qth.net> > Sent: Sun, Feb 11, 2018 8:30 am > Subject: Re: [Elecraft] K3 VFO A > > Please stop e-mailing me off list asking if it is locked. No, its not > locked. > > Thanks, > J > > On Sat, Feb 10, 2018 at 5:23 PM, Joseph M. Durnal <joseph.dur...@gmail.com > > > wrote: > > > My K3 VFO A knob doesn't seem to want to do anything. It won't change > the > > frequency, nor will it change the settings in the menu. My first guess > is > > that the encoder is bad. VFO B works fine. Is there any way I can > verify > > this before I pull the K3 apart? > > > > Thanks & 73 de Joseph M. Durnal - NE3R > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to raysil...@verizon.net > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to joseph.dur...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com