Hello,
the sub receiver is not in the same mode as the first.
Always DOUBLE-TAP A->B until you see on the display "A->B ALL" (copy all
info like mode, bandiwidth and so on... on the VFO B) and only AFTER,
activate the SPLIT.
In this way, you are sure that you VFO B is configured like the first
and ready to work in split mode.
73's de IW2NOY
Il 12/02/2018 16:17, NOEL POULIN ha scritto:
Hello,
I was trying to work in split mode in rtty with the k3s.
K3s says SPL N/A...What am I missing????
Thanks
Noel
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to grazi...@roccon.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com