Rick, Thanks for advice on Utility. I downloaded and ran but still no joy. I did see FW rev 05.38. I don’t know if that cud be the problem?
Greg Best Sent from my iPhone > On Feb 15, 2018, at 9:31 PM, Rick Tavan <r...@tavan.com> wrote: > > You got good advice on baud rate. Also, it's wise always to confirm proper > operation with K3 Utility first. If it doesn't connect, chances are N1MM > won't, either. Utility marches through speeds until it finds one that works. > MM requires a specific speed setting. > > 73, > > /Rick N6XI > > > Rick Tavan > Truckee, CA > >> On Thu, Feb 15, 2018 at 5:33 PM, Greg Best <gbconsultin...@gmail.com> wrote: >> I am trying to get N1MM+ to talk to my K3 but will not do it. >> >> I am setup for 4800 B, Data 8 bits, Parity N, stop bits 1. DTR and DTS have >> been tried with both Always ON and Always OFF but neither one works. >> >> I have tried the Radio reset command from N1MM+ with no luck. >> >> Can anyone help? >> 73¹s >> Greg >> >> 16100 Outlook Avenue >> Stilwell, KS 66085 >> 816-792-2913 >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to rta...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
