Harlan,
If you have software that will poll the KAT500 with the TP command then
it may be close to real time, but not exactly.
73,
Don W3FPR
On 3/1/2018 6:30 PM, Harlan Sherriff wrote:
Thanks Dick, but I don’t see that command in either programmers reference
manual.
So Don, there is no way to programmatically know when the tuning has completed?
Sent from my iPhone
On Mar 1, 2018, at 6:16 PM, Don Wilhelm <[email protected]> wrote:
Harlan,
I don't believe that is available on a real time basis (which is what you
apparently are seeking).
Yes, the K3 knows when the KAT500 has stopped tuning, but it is not available
as a GET command.
73,
Don W3FPR
On 3/1/2018 6:02 PM, Harlan Sherriff via Elecraft wrote:
Is there a GET command for either the K3 or KAT500 that will show when the
tuner has completed a tune?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
