If your K3 does not have gold pins on the front panel, and they
are getting oxidized, strange error messages may occur on
power-up. Either do the gold pin mod, or hit the old tinned pins
with DeoxIT.
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message-----
From: Don Wilhelm
Sent: Monday, March 5, 2018 5:40 PM
To: Jed Petrovich ; Elecraft Email List
Subject: Re: [Elecraft] ERR AT3 on K3
Jed,
I would suggest unplugging the KAT3 and re-inserting it.
Sometimes that
will wipe the contact pins of any oxidation and correct the
problem.
Consult the K3 Assembly manual to see how to install the KAT3,
reverse
the steps to remove it.
Repair is possible if you are capable of troubleshooting to the
component level. The schematics are available for download from
the
Elecraft website.
If that does not resolve the problem, then contact
[email protected]
for further actions.
73,
Don W3FPR
On 3/5/2018 7:20 PM, Jed Petrovich wrote:
Hello all:
Over the weekend I was getting an ERR AT3 on my K3 when I first
turn on the
radio. I did read in the manual about removing the KAT3, but
decided just
to try setting the Config to "not inst" and the message no
longer appears
during power up. The radio seems to work just fine without the
tuner
"installed".
Is it likely the KAT3 is the problem or could it be something
else? Also
wondering it is possible to have the KAT3 repaired.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
