Harv,
If you have resonant antennas, you should set the tuner in the KPA1500
to bypass when those antennas are selected. That will bypass the L/C
elements in the tuner in the KPA1500.
73,
Don W3FPR
On 4/29/2018 5:04 PM, Bob Harvey - K2PI wrote:
Hi Don:
No, I have not set them to bypass. I do not understand why I would since
these are resonant antennas that I wish to use on those bands. Am I
misunderstanding you, or wasn't my post clear?
These antennas have actual SWR's that are lower than the KAT-500 reports as
the "bypass SWR". Why should that be?
73
Harv
k2PI
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com