Have you tried doing a P3 reset as described on page 45 of the manual? If that doesn’t work, I’d suspect the control cable from the K3S data connector to the P3 first. Of course, there could be some other hardware problem in either box.
Elecraft support can probably walk you through troubleshooting. Grant NQ5T K3 #2091, KX3 #8342 > On May 23, 2018, at 9:14 PM, Mark Wheeler <mark3...@icloud.com> wrote: > > Both the P3 and K3S are brand new. I have made all connections per page 6 of > the P3 owners manual. The K3S has all options installed except the 2 meter > band option. I have confirmed all connectors are tight and I still do not > have the frequency at the top, or any of the other missing P3 > options/functions available. > > Are there any K3S settings that I need to confirm? Any other ideas of why > this is not working? > > Thanks. > Mark > WU6R > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ghyoung...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com