Congratulations to have found the cause. If signal level on P3 screen becomes unstable while the BNC cable is completely plugged in at both sides, check the cable itself. My case was that the signal level was unstable and sometimes went very low. I had thought that K3 or P3 circuit was in trouble but found that connection inside one end of BNC cable connector was unstable. Replacing the cable completely fix the problem.
73 de JH3SIF, Keith > 2018/05/27 7:00、Doug Eaton via Elecraft <elecraft@mailman.qth.net>のメール: > > Thanks to all who replied so quickly. The BNC cable wasn't completely > plugged-in at one end. Sometimes it's humbling being human! > 73, Doug N7QS > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jh3...@sumaq.jp ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com