Tom, Earlier today I did delete the driver as you describe, but I did not know there were drivers on the Elecraft website. I’ll check it out tomorrow.
Thanks for the suggestion. Mark WU6R > On May 28, 2018, at 8:29 PM, Tom <tom...@videotron.ca> wrote: > > Hi, > The first thing I would do at this point, is to go into the device manager > and select "Properties" for the driver. Next select the "Driver" tab and > then click on "Uninstall Device" and Make absolutely sure that you select > "Delete the driver software" > > That will get rid of it. > Next download the appropriate drivers from the Elecraft site or use the link > for it. Unplug your USB cable to the radio, install and only plug in the > cable when directed or the install is complete. > Never do an "Update Driver". In many cases Windows will substitute a > universal driver that may not do what you want. > > Now with the latest Windows 10 update, some changes have been made to the > Privacy settings on your computer, specifically devices that act as > Microphones, one of which is probably the USB codec that Elecraft uses. Make > sure it is set to allow. > 73 Tom > va2fsq.com > > > > > -----Original Message----- From: Mark Wheeler > Sent: Sunday, May 27, 2018 10:29 AM > To: elecraft@mailman.qth.net > Cc: Mark Wheeler > Subject: [Elecraft] Windows 10 Update Breaks COM Port for K3 & P3 Utilities > > With the latest Windows 10 update earlier this week, my K3S and P3 can no > longer communicate with my Windows 10 PC via the USB cables. I’ve gone into > Device Manager and right clicked on the COM12 device drive and clicked > “update driver” and that updated from a 2016 driver to a 2017 CM port driver, > but neither connect the PC to my K3S or P3. Any suggestions? Thank you. > > Mark > WU6R > (formally KM6HFR) > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to tomb18@videotron.causb cable and only plug it in when > Directed. > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com