I'd swap out the batteries and then go through the procedure that Don recommends.
Dumb question; they are all NiMH, right? Hopefully Eneloop or a similar marque? On Thu, May 31, 2018 at 17:06 Don Wilhelm <donw...@embarqmail.com> wrote: > Bob, > > Read the BAT ERR description on page 4 of the KXBC3 manual. > > You may have to remove the batteries and check the terminal voltage of > each one with your DMM to determine if you have a bad one, or if all are > possibly fully charged. > > Reloading software will not make any difference, but likely will not > hurt anything either. > > 73, > Don W3FPR > > On 5/31/2018 4:51 PM, Bob G3PJT wrote: > > When I try to charge the battery I get Bat err message and charging is > > terminated. I have reloaded s/ware etc but no change. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to r...@wc3t.us > -- 72, Rich Hurd / WC3T / DMR: 3142737 PA Army MARS, Northampton County RACES, EPA-ARRL Public Information Officer for Scouting Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: *FN20is* ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
