I don't think that is correct. Nothing touches the TCXO, the VCTRL pin
is not used. The EXREF module just reads the actual ref frequency and
that information is used to set up the synths. As the TCXO drifts the
synths just use the new measured ref frequency.
Regards,
Mike VP8NO
> BTW the K3 frequency is established by the TCXO and the external
> reference merely performs a periodic check. Any freq error causes a
> correction instruction to the TCXO to bring it back onto frequency. The
> TCXO-3 is rated at 0.5 ppm which is +/-5 E-7. Adding the EXREF limits
> drift to 0.1ppm or E-7.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
