What you report of compression near the maximum
power is certainly true of the amplifiers like
the SPE-1.5K that use a single device, but I
would have thought this would not be true of the
KPA1500 that uses 2 devices. This is the reason I
returned my SPE and ordered the KPA. Hopefully
the compression is less than 1dB.
Has anybody else measured it?
- Paul - KW7Y
At 02:21 PM 6/9/2018, you wrote:
I recently ran a two-tone test and measured CW
power gain. (SN1078)Â It doesn't look
good. The two-tone waveform shows distinct
"flat-topping", and the power gain drops 25
percent from 1000 to 1500 Watts. My old 3-500Z
amplifier is much better. Has anyone measured
IMD or linearity, or seen any test results?
While I'm primarily a CW operator, I'd be very
reluctant to use the amplifier on SSB. 73, Scott
K9MA -- Scott K9MA k...@sdellington.us
______________________________________________________________
Elecraft mailing list Home:
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm Post:
mailto:Elecraft@mailman.qth.net This list hosted
by: http://www.qsl.net Please help support this
email list: http://www.qsl.net/donate.html
Message delivered to p...@paulbaldock.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com