First thought is to download and read the assembly manual for the kit. I think it’s a plug in device.
Sent from my iPhone ...nr4c. bill > On Jul 10, 2018, at 11:57 AM, Scott Manthe <scott.man...@gmail.com> wrote: > > Hi all- > > I picked up a used KX3 for a pretty good price. However, the VFO B encoder is > defective. It has lost the push-in switch functionality. So, I need to > replace it. If you've replaced one of the encoders, how harry is the process? > I built my KPA500 and am relatively competent with a soldering iron, having > replaced SMD diodes and transistor on occasion, but I'd hesitate with my > oldish eyes to want to do much more than that. It'd be nice to save the $125 > trip to Elecraft, but I don't want to make a minor problem worse. Any > assistance would be greatly appreciated. > > > 73, Scott N9AA > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com