Mark,
The jack *should* fit through the hole, but I also know that it does not
with the jack supplied.
So ream out the hole in the top cover. I use a thin bladed knife, but a
drill bit or a proper reamer will work.
You only have to take a little metal from the inside of the hole.
73,
Don W3FPR
On 7/19/2018 11:00 AM, Mark Petrovic wrote:
In the top cover for my K2 S/N/ 7809, the external speaker hole is way too
small for the jack to pass through. Is it the design intent of the K2 that
this jack be screwed in? Or should it pass through without forcing it? Or
does it matter?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
