Thank you to all those of you who replied to my earlier query regarding band data information.
I am now also looking for a way to provide a CAT interface to the SPE amplifier without using a separate computer program. My set up is a K3 fully upgraded with the RJ45 serial port which connects via the Elecraft custom cable to a P3. Both connectors on the P3 are DB9, ie normal serial connectors. As such, can I simply insert a further Y cable between one of the P3 serial ports and the incoming cable from the K3 and then use the extra leg (with a DB9 on the end) to connect to the SPE amplifier for CAT control ? Or is that idea too simple ? Any advice would be appreciated. Thanks and 73 Barry VK2BJ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com