Hi all I am trying to upgrade a P3 MCU 1.29 to 1.54 and\or 1.60 (No SVGA option installed).
When I hit send checked items to P3 the relays click every 2 seconds and I see 2 messages repeat forever: 1. Attempting to connect P3 on port COM1 at 38400 bit/s in the P3s utility window, 2. Checking for SVGA on the P3s screen. No uploading is performed & I can terminate the loop only with the cancel button. Environment: -P3 utility ver 1.16.3.1 -P3 is connected only to PS (13.8v external) & PC (Genuine full RS-232 cable). -All files are present in the P3 firmware folder (Windows 10 1803 build 17134). Any ideas please? Thanks in advance, Isaac, 4Z1TL --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com