I’d start by using same strings as with previous mic. Adjust as necessary.
Sent from my iPhone ...nr4c. bill > On Aug 14, 2018, at 3:03 PM, Bob McGraw K4TAX <rmcg...@blomand.net> wrote: > > Does Heil have the settings on their website? I seem to recall they do. > That is a good place to start. > > Bob, K4TAX > > > Sent from my iPhone > >> On Aug 14, 2018, at 1:58 PM, Thomas Donohue <tomdo...@gmail.com> wrote: >> >> I recently purchased subject mic and will be connecting it to the K3S >> shortly. Before I do that, I was wondering what mic settings to use? I >> currently have a Heil PR-10 mic and am using the MIC FP HI menu setting and >> a mic gain of 20; the PR-10 works fine, but I wanted to get a mic that I >> could switch back and forth from the wide HC-5X cartridge to the narrow or >> DX HC-4X cartridge, thus the HM-10 XD. I have purchased the XLR 4 pin CC-1, >> connecting cable to replace the XLR 3 pin cable that I use with the PR-10 >> for connection to the FP Mic connector. The PR-10 has a 600 ohm balance >> impedance while the HM-10 XD has a 600 ohm impedance, unbalanced, I guess. >> To begin I intend to use the MIC FP HI menu setting. Does anyone see a >> problem with that or is there anyone using a HM-10 XD that can offer some >> suggested settings. Any response or info will be appreciated. >> >> Best 73, >> Tom/W1QU >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to rmcg...@blomand.net >> > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com