Chris, The CAL S LO and CAL S HI values are as you observed.
Turn the RF Gain to full clockwise, and remove the antenna. Turn the preamp on. Adjust CAL S LO first so there are no bargraph LEDs illuminated. Then tune in an S-9 signal (preamp on or off, your choice), and adjust cal S HI for an S-9 indication in the bargraph. Usually that value will be between 23 and 19.
73, Don W3FPR On 8/27/2018 2:13 PM, Chris Kimball wrote:
Thanks to Martin and Don. Yep, the age setting had mysteriously advanced while in storage. I had forgotten about the CAL submenu. Messing with the settings got me some more reasonable S-meter action. Apparently the S LO should be greater than S HI in normal operation.
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com