I used the adhesive backed 12mm wide tape from an old Brother P-Touch on
small print which is about 1/8 of an inch. I then cut them down to about
3/16 width by 2-1/2" long. I put one on each side of each row of F keys.
It's the same tape I use for labeling all the cables in the shack.
73 Dwight NS9I
On 8/28/2018 3:51 AM, IK4EWX wrote:
Somebody has well solved the problem of labeling clearly the F-Keys on the
K-POD?
How?
I am interested to use a clean and clear way of labelling the K-Pod
commands.
Thanks.
Ian - IK4EWX
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@bayland.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
