Thanks Grant and several others offline. I'm now up-and-running courtesy of your suggestions. I have no idea why Utility couldn't pull the dsp firmware off the Elecraft ftp site, but could access all the firmware downloaded to a thumb drive.
So now continuing trial pack and inventory check for VK9XG... 73 David G3WGN M6O Sent from my Samsung Galaxy smartphone. -------- Original message -------- From: Grant Youngman <ghyoung...@gmail.com> Date: 22/09/2018 15:07 (GMT+00:00) To: David Aslin G3WGN <da...@aslinvc.com> Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 DSP firmware update 'Missing' Since you are looking at the FTP site, just download all of the files from there to a local folder. Then browse to that local folder with Utility instead of having Utility do the download. Grant NQ5T K3 #2091 KX3 #8342 On Sep 22, 2018, at 9:39 AM, Dave G3WGN M6O <da...@aslinvc.com<mailto:da...@aslinvc.com>> wrote: Update: on further examination when I 'Copy new files from Elecraft' in the utility, it responds with '2 files copied' then waits for the download. Clearly it must need to copy more than two files for MCU, FPF and DSP. I can see all the needed files on the Elecraft ftp site, but the utility is not copying the DSP 2.88 files that are there. In case my anti-virus/anti-malware software was interfering with the copy process, I temporarily switched it off. No difference, still reported 2 files copied, no DSP. 73, David G3WGN M6O ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com