Message: 10 Date: Mon, 15 Oct 2018 09:21:36 -0700 (MST) From: n6hz<psaff...@elecraft.com> To:elecraft@mailman.qth.net Subject: Re: [Elecraft] Elecraft P3 Bar Cursor Message-ID:<1539620496239-0.p...@n2.nabble.com> Content-Type: text/plain; charset=UTF-8
Hi Ed, Are there magenta and green arrows toward the bottom of the spectrum display?
yes
These indicate where the cursors are relative to your current center frequency.
Understood
If you are in fixed tune mode, you can easily re-center your VFO A cursor by two consecutive long presses of the SPAN/CENTER button.
In Fixed Tune Mode, two consecutive long presses of the SPAN/CENTER button didn't help. Green and Magenta arrows are still at the bottom left of the display
If all else fails, a memory reset can be performed by holding down the MENU button while powering up the P3. Note that this will erase an function key settings.
I did a memory reset. The green and magenta arrows are still at the bottom left of the display. I reloaded all firmware with the latest versions. The Green and Magenta arrows are still at the bottom left of the display.
The P3 seems to be working with the exception of the U and BAR cursors.
Ed ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com