I was horrified to discover the Elecraft mail server mangled the picture URLs, and added old URLs at the bottom. Please try these, without quotes:
SPX3 with KX3: "http://www.iloc.com/ag6zz/SPX3/AG6ZZ_SPX3_KX3_2.JPG" SPX3 Left Oblique: "http://www.iloc.com/ag6zz/SPX3/AG6ZZ_SPX3_LeftOblique_2 [1].JPG [2]" On 2018-10-18 01:51, Robert Morris wrote: > SPX3 > Here is an update to the powered external speaker for the KX3 I've been > developing, named SPX3. It has required a lot of patience waiting for > prototype circuit boards and sheet metal enclosure parts to be fabricated. > Refinements are still in process. At any rate, here is the latest. > > AESTHETICS > The speaker is designed to match the overall look of the KX3 and PX3, and > accept similar third-party panels and covers as for the KX Line. The folks at > SIDE KX are working with me on this. Presently, it uses the same feet as the > KX3 and PX3, and the same style rear leg as the KX2. It is the same height > and depth as the KX3 and PX3. There is one power port for charging the > internal lithium battery, and input and output stereo jacks. The speaker is > mono. The output jack redirects the right channel from the stereo input for a > second speaker, just like with the Elecraft SP3 and other similar external > speakers. The speaker is amplified. > > SPECIFICATIONS > The SPX3 amplifier puts out a maximum of 5W into a 10W speaker driver, and is > about as loud as any external radio speaker gets. Volume is adjusted by the > KX3 and by the volume knob on the SPX3. The volume knob also turns it on and > off. It plugs into the KX2/KX3 PHONES jack. There is a built-in band pass > filter to reduce noise and improve the listening experience. > > Just like the KX2, KX3 and PX3, the SPX3 is not waterproof. So, don't drop it > in a lake. It will handle all conditions appropriate for the KX Line, and is > meant for indoor and outdoor use. > > You'll see the speaker is not a polished finished product yet, as it's a > prototype spray painted by hand without labels. A power on LED will be added > to the final product. > > Please note, the KX3 in the photo is only to demonstrate the speaker. > > Pictures: > > SPX3 with KX3: http://www.iloc.com/ag6zz/SPX3/AG6ZZ_SPX3_KX3_2.JPG > SPX3 Left Oblique: http://www.iloc.com/ag6zz/SPX3/AG6ZZ_SPX3_LeftOblique_2 > [1].JPG [2] > > 73, > Robert (AG6ZZ) > > SPX2, SPX3, are Trademarks (TM) of Robert J. Morris > SPX2, SPX3 are Copyright (C) 2018 by Robert J. Morris Links: ------ [1] http://www.iloc.com/ag6zz/SPX3/AG6ZZ_SPX3_LeftOblique.JPG [2] http://www.iloc.com/ag6zz/SPX3/AG6ZZ_SPX3_RightOblique.JPG ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com