So far as I am aware software shouldn't be changing. No CAT connection
from rig to PC, just changing mode on the front panel of the K3 and
sending tone in the LINE IN connector.
On 20/11/2018 10:36, Nr4c wrote:
Check the DATA Sub-mode. You may be thinking AFSK but the software may reset to
FSK D and that doesn’t require audio into the sound system.
In the TX monitor, Do you hear diddles or just a single tone?
Sent from my iPhone
...nr4c. bill
On Nov 19, 2018, at 10:26 PM, Martin Sole <hs0...@gmail.com> wrote:
Can anyone help with a quick DATA mode problem.
I've always used AFSK but it seems to have stopped working on transmit. I can
set DATA A and then send audio from the PC into the radio. It transmits fine,
no problem. Just switching to data mode AFSK and then sending audio. the vox
operates as before but no modulation, no output.
In summary, RX works fine both modes
TX works fine in DATA A
TX does not work other than trigering VOX in AFSK A.
Nothing else changes other than the mode on the front panel. Line in, level all
set the same.
Figure I must be doing something dumb.
Any help?
Thanks
Martin, HS0ZED
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@widomaker.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
