On 5/24/06, Sandy W5TVW <[EMAIL PROTECTED]> wrote:
You might be better off building a 160/80 and then a 30/17, or
30/15 board. The 10 meter band is still in some limbo stages I think.
I wanted 80/40 on the same board as this will be the combo I use at
home the most. I have a dual band 33' tall vertical in the center of
the yard that works real well on 80 and 40.
Just be aware that it's not "wise" to have two boards with the same band
(like an 80/40 and 40/20 board as the CPU can only remember one
corrective offset per band.)
Yup, I knew of this. This is why I came up with the combos I did.
80/40 because of the antenna above. 20/15 when I head to the woods as
antennas for these bands are much easier to carry and deploy. 30/17
for when there's a major contest with all the kilowatts hogging up the
other bands.
I've been tickled pink with my K1. Have 160/80 then the 4 band
Are there any gotchas with the 160 configuration as it stands now?
Thanks
72 de JT, W6FO
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
