Are you going to use the KX3, KXPA100 and the KPA500 all together? I can't help with that as I don't have the KXPA100.
I use the KX3 with just the KPA500. You get about 250W out with 12W in. You use the ACC2IO cable that comes in the right angle cable kit or standalone and an RCA to RCA cable. https://elecraft.com/products/kx3-pckt-accessory-cable-kit https://elecraft.com/products/e980232_acc2-io-cable-module-config-via-kx3s-acc2-io-menu-item-included-in-the-kx3-pckt-cable-set It picks up the frequency with the first dit or a small carrier. Hope this helps or someone else pipes up if you want to use all three together. 73, Mark W7MLG On Thu, Dec 20, 2018 at 1:21 PM John Pierce <ja-pie...@verizon.net> wrote: > I recently purchased a KPA500 with the cable to connect to the KX3. Can > someone tell me where the plugs on cable that connects the KPA100 amp plug > into the KX3? I have been told that that cable can be used to connect to > the KPA500 without the frequency control. > > > > John > > Ad2F > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to marklgoldb...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com