I have had my K3S about 6 months and working with WSJT and DX Lab have used it with serial data for radio control plus RTS PTT with USB audio. I have tried several times to convert to just USB alone but I am always stymied when choosing RTS for PTT. I can use USB for Data and Audio fine but it is when trying to choose RTS is where the problem arises. The radio goes into transmit when RTS is selected as PTT. I can select DTR for PTT and everything works good but normally by convention DTR is used in keying on CW. I have gone through the USB.SAFE and UNSAFE variations. I disconnected all data cables, USB, RS232 and ACC Plug and still when I select RTS for PTT the radio goes into transmit. I have tried that with SAFE and USB.SAFE set. Again DTR for PTT works fine. All revisions are loaded and USB is selected under RS232 setting. Any suggestions. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
