Keith, Go to the menu and make sure AM MODE is turned ON.
73, Don W3FPR On 1/13/2019 5:37 PM, Keith Onishi wrote:
Hello, Tapping MODE switch on my KX3 with MCU 02.90, most latest firmware, switches mode from SSB -> CW -> FM, then back to SSB. It does skips AM. I have not switched to AM for long time. I think I was able to select AM by tapping MODE before. I went through KX3 Owner’s Manual to look for any configuration to skip any specific mode, but found none. Sending “MD5;” from KX3 utility software switches KX3 to AM mode. So MPU is OK on selecting a mode except switching the mode by MODE switch. I restored my KX3 configuration backed up almost 6 months ago, but the symptom is same. Then I reloaded the latest firmware to my KX3, but the same result.
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
