Thanks, Gernot. I came to the same conclusion. I also tried using
"BSET", but it doesn't enable the RIT on VFO B. Maybe a firmware update
could fix that?
73,
Scott K9MA
On 1/14/2019 19:01, g...@gmx.net wrote:
Scott,
I looked at the programmer ref manual and realized there is only one
RIT/XIT, which is controlling VFO A. I guess there are two choices left:
- either you press A/B to switch to your CQ VFO.
- or you try to mimick RIT of VFO B via FBxxx; commands with the help
of an external control knob.
Maybe this feature can be added more easily to the K-POD?
73
Gernot
DF5RF
Am 13.01.2019 um 18:14 schrieb K9MA:
I've found that during some contest operation, it's handy to call CQ
on VFO B, while using VFO A to search and pounce. (Known as Single
Operator 2 VFO mode, SO2V.) That way, when unassisted, I can use the
P3 to locate promising signals. However, I sometimes wish the RIT
would work with the sub-receiver on VFO B. Has anyone found a way to
do this? Even better would be to have RIT on VFO B and XIT on VFO A.
If it's not currently possible, I'd add it to my firmware wish list.
73,
Scott K9MA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@sdellington.us
--
Scott K9MA
k...@sdellington.us
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
