RS-232 set to USB. Sent from my iPhone ...nr4c. bill
> On Jan 16, 2019, at 1:40 PM, Dave Sublette <k4to.d...@gmail.com> wrote: > > I had the K3s operating correctly controlling it with an RS232 cable from > the computer. When I try to replace that with a USB cable, the radio isn't > found. The computer says the port is operating correctly. I'm stumped. > > The software's the N1MM. I've made an inquiry there. > > Perhaps there is a menu item that needs attention? I have been through it > all, but don't recall that there is. > > Any suggestions? > > Dave, K4TO > > ps -- The P3/SVGA is running an external monitor just fine and the control > path evidently goes through the P3. I have the proper cable connected. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
