I spent more time than I would like to admit trying to figure out why there was no output when trying to transmit digital modes from the internal sound card. It was the line gain (mic gain), it defaulted to 0 after installing the KIO3B.
73 de Joseph M. Durnal - NE3R On Sat, Jan 19, 2019 at 5:44 AM Terry Hines <trthi...@verizon.net> wrote: > I'm having trouble with the I/F between Windows 10 and the USB sound card > in > my upgraded K3. I've checked and the Sound Card settings in Windows 10 and > they are exactly as shown in Chapter 10 of Fred Cady's book. It receives > and > decodes FT8 perfectly but can't transmit. When I hit the "Tune" button on > the WSJT-X screen the red "PTT" light comes on but there is no input signal > to the K3 and hence no RF output. What am I doing wrong? > > Terry N4ZH > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to joseph.dur...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com