I am not sure why VOX would affect the DVR? On SSB I use a KDVR3 activated by my computer's F-keys and my VOX is on 100% of the time.
John KK9A Nr4c wrote: Is it possible that you have VOX turned ON or bumped a PTT or FOOTSWITCH? I've had the KDVR in a K3 since 2009 and my K3S since they began shipping (S/N 10069, very early s/n). I've never had any issue like you describe. Have you contacted Elecraft customer support? Sent from my iPhone ...nr4c. bill > On Jan 19, 2019, at 7:22 PM, Dauer, Edward <edauer at law.du.edu> wrote: > > Today during the NAQP I experienced occasional strange behavior with a new KDVR in an updated K3 . . . wondering if this has happened to anyone else. The recorder works just right 98% of the time. Randomly, it hangs up in the middle of a recorded message. It just stops. No audio, no RF, but the K3 remains in transmit mode. Sometimes tapping the same M button again restarts the message from the beginning and all is well. Sometimes, nothing has any effect - nothing will get the rig out of transmit other than a power down. And then all is well again for a while. This happens on more than one of the memory buttons, and it happens whether I tap the M button or the corresponding programmed button on the K-Pod. It is infrequent, intermittent, and of course happens at the worst times. On one and only one power-down I saw ERR-DVR. Re-recording messages doesn't fix it. The K3 has F/W revision 5.64, which may be one revision behind. Anyone else experienced this or have an i > dea what the problem is? Tnx for any advice . . . > > Ted, KN1CBR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com