Hi Andy The amp appears to be working properly.
The leads of the resistor look like they are bent at the end as if it was soldered to surface of the board and not through hole. Will be interesting what comes out of this. Dave wo2x Sent from my waxed string and tin cans. > On Jan 20, 2019, at 6:39 PM, Andy Durbin <a.dur...@msn.com> wrote: > > "I've looked at the boards and cannot see where it came off. I also looked at > the pictures Elecraft submitted to the FCC and they do not show it." > > What doesn't work that used to work? If nothing, then maybe they slipped it > in there just to confuse you. From the photo it looks as though it was cut > out of whatever circuit it used to belong in. I've heard of SMT components > dropping of boards but it should be impossible for a properly installed wire > ended component to fall off. ( I deliberately said wire ended rather than > through hole because I still remember tag strip construction). > > Andy, k3wyc > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rocke...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
