The revised KAT3A has a hard bypass with relays. The KAT3 does a “soft” bypass by placing the tuning network in some kind of neutral position.
I don’t know what the KAT3 actually does to achieve this, but is it possible this is somehow related to the anomaly you are seeing? With the KAT3 in “neutral” (whatever that actually means), since the SWR bridge sits between the KPA3 output and the KAT3 input, maybe that’s something to look at — or at least get more info from Elecraft about how it works and if that might be related. Grant NQ5T K3 #2091 KX3 #8342 > On Jan 21, 2019, at 8:34 AM, Ed G <ed.n...@gmail.com> wrote: > > Hi Barry, > I think what I am seeing is related to your experience. I ran through > some additional testing. I see perhaps some slight differences between ANT1 > and ANT2 positions as far as SWR readings, but nothing significant, at least > on 40 meters. > I do now see something I’m even more puzzled over. While collecting SWR > readings into a dummy load on 10 meters, I initially did see a high (2.0:1) > reading on the K3 meter. I switched in the K3 tuner, and brought the SWR down > to 1:1. But when I then bypassed the tuner, the low 1:1 SWR remained. This > was true for either ANT1 or ANT2. I really don’t understand that. > So back to 40 meters, where I first noticed the high SWR anomaly. I > thought I would try the tuner again, and then bypass it, to see if SWR would > stay low on the K3 meter as it did on 10 meters. It did not. So I still > have the anomaly on 40 meters, and it is the same on either ANT1 or ANT2 > positions. > To summarize: > 1. SWR using a dummy load on 40 meters remains constant using an external > LP-100A meter, but varies greatly using the K3 meter. As you tune up in > frequency on the 40 meter band, the SWR on the K3 meter rises to almost 3:1, > and the K3 output power drops back significantly. > 2. Antenna tuner settings appear to “stick” on 10 meters, even when the tuner > is bypassed. > > I believe some users, assuming there are others that have K3s which would > exhibit this behavior, may not have noticed this anomaly. I do believe it may > be responsible for what some users have noticed when using their K3 with an > amp such as the KPA1500. That is, power overshoot. I suspect the K3, at least > for me on 40 meters, is folding back power in response to a false SWR > reading, and this can be seen in how the KPA1500 amp correspondingly drops > back in power as the user transmits. That is perhaps why (again, for my > situation) I see the power overshoot only on 40 meters when using my KPA1500. > --Ed— > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
