On Sat, Feb 9, 2019 at 10:51 AM Andy Durbin <a.dur...@msn.com> wrote:
> Thanks Jack. I suspected that would be the case but it was better to ask > than to waste my time experimenting. I'll just have to put a bit more > thought into how to configure the KPA500 polling devices and the associated > serial data multiplexing relay(s). > The Serial Box <https://bit.ly/S-BOX> (S-BOX) was specifically designed to make it easy to connect multiple devices in parallel to any transceiver's serial port, including a PC, KPA500, KAT500, KPA1500, SteppIR Controller, Kessler AT-Auto, Shackmaster SM-8, etc. One device is connected to Pin 3 (usually the PC running logging software to do the polling), and the rest are wired in parallel to listen to the radio's responses on Pin 2. AutoInfo mode may also enabled to let all devices track the transceiver's frequency automatically when no PC or logging software is being used. 73, Bob, N6TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
