Dave, I know this works with the DVK voice memories, because I have done exactly that. However, you will not be able to program CW/digital message memories as easily, because they have to be recorded using the K3's internal CW keyer (from the paddle jack). You can't record them from the straight key jack, which is the CW keying connection that the RRC uses.
There is an alternative way to program these messages using the K3 Utility, but I don't know whether you can safely use the K3 Utility over a remote connection for this purpose. If you use radio control/logging software that has the capability to use the Winkeyer in the RRC, that software probably has its own CW message memories that you can use instead of the K3's message memories (for example, the function key messages in N1MM+). For similar reasons, the CW-to-Data feature (sending RTTY or PSK using a CW paddle) is not likely to be possible using a remote connection. 73, Rich VE3KI N3HE wrote: Hi, all concerned: With much help from many sources, for which I am thankful, I now have an operational remote control system: K3/0 to remoterig 1258 in Cincinnati OH to 'net to remoterig 1258 to K3S to antenna in Dayton OH. The remote system has worked fine so far. I've had a number of CW and SSB Q's, mostly on 40M. I tried to program the front-panel MESSAGE memories per the K3S user manual instructions, and was unsuccessful, which got me to wondering if others have found inoperative functions. I look forward to any and all responses, tks. Brgds, Dave, N3HE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
