OK. One thing common to it all that could be affected by the flexing of the RF board, is the J14 connector assembly. It looks like it could be a bit fragile, since it's so tall. I'll check it again, and then start tapping.
Thanks again Don. 73, Jim KO5V -----Original Message----- >From: Don Wilhelm <donw...@embarqmail.com> >Sent: Mar 2, 2019 3:51 PM >To: Jim KO5V <k...@earthlink.net>, Elecraft List <elecraft@mailman.qth.net> >Subject: Re: [Elecraft] K2: Flaky 160M switching > >Jim, > >K1 and the entire 160 meter low pass filter is not in the path for the >RX ANT, so changing K1 will not help. > >Remove the top cover (you can operate like that) and tap on things >gently with a pencil eraser to see if you can locate the problem. > >73, >Don W3FPR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
