Jim, this is with the internal tuner in either mode--bypassed or inline. If I sit on 3504, I'm about 1.65:1 natively. I could run that without a tuner or with. But in either case, it faults out instantly with QRO power applied. The SWR seems to go haywire on the lower frequency ranges of the 80m band.
- pjd -----Original Message----- From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> On Behalf Of Jim Brown Sent: Saturday, March 9, 2019 5:46 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] 80m KPA1500 High reflected power problems Hi Peter, The KPA 1500 has a built-in antenna tuner. Is it possible that it's not set up, or is not set up correctly, or is not being used correctly? Perhaps the wrong operating mode for it, or it's calling up wrong memorized settings? I don't own one, but borrowed one from K6XX while he was at WRTC. I mostly used it on 6M, plus the few hours 20M was open to DL enough to work the WRTC stations. 73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
