I've never had any trouble with REF LEVEL, but it can't hurt to try the
save / reset / restore routine and see if it helps.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On 10/03/2019 18:14, Dave Cole (NK7Z) wrote:
I am seeing something similar to this as well... Not in SPAN, but in
REF LVL. I set REF LVL while on 30 Meters, and leave the band.
Ssometimes when I return to 30, I need to touch the REF LVL level to
get it to return...
By touch, I mean I select REF LVL, then just turn the knob ever so
slightly. The P3 then reverts to where it should be...
P3 with SVGA, and power monitor. Only on 30 meters... Any
suggestions?
73s and thanks, Dave (NK7Z) https://www.nk7z.net Award Manager, 30MDG
Grid Awards ARRL Technical Specialist ARRL Volunteer Examiner ARRL
OOC for Oregon
On 3/10/19 8:06 AM, Victor Rosenthal 4X6GP wrote:
I had a problem in which both SPAN and CENTER changed arbitrarily
(it seemed) on band changes. I finally saved the configuration
using the P3 Utility, reset the P3 to factory parameters (power
off, hold LABELS while powering on, wait for 2 seconds, let go of
LABELS), and finally used the utility to restore the
configuration. The problem hasn't recurred -- it's been a few weeks
and it was pretty much a daily occurrence. YMMV.
73, Victor, 4X6GP Rehovot, Israel Formerly K2VCO CWops no. 5
http://www.qsl.net/k2vco/
On 10/03/2019 16:51, Gary J Ferdinand wrote:
Various searches dredged up nothing helpful. I recently
developed a P3 problem. The SPAN does not get saved. Whenever I
change bands to a band I had set it, say, to 50 kHz, the SPAN
resets itself to 5 kHz. Sometimes I can even watch the display as
it cranks down the bandwidth.
This is a P3 *without* SVGA, but *with* TXMon. It has 1.60
firmware installed and reloaded without effect. It is not
directly connected to a PC. The transceiver to which it is
connected is a K3S.
P3 SPAN settings: SpanScale: REF LEVEL ONLY, SteppedSpan: OFF
I appreciate any pointers to where I should look. Thanks.
73/Gary W2CS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
