As usual Don thanks. I just found the ATU manual on line so will review that next. de KG9H
> On Mar 26, 2019, at 10:11 AM, Don Wilhelm <donw...@embarqmail.com> wrote: > > Frank, > > An external SWR meter will only show you the antenna SWR which will not > change no matter what the ATU does. If you want to see that for any antenna > and band, you can use the ATU CLS setting which effectively bypasses the ATU > and shows you the antenna SWR. > > The important thing to the transmitter is the tuned SWR which you can see by > setting the ATU menu to rx.x which will give you the SWR at the input of the > ATU. > > See the KAT1 manual page 11 for full display capability. > Or just trust that the ATU will do its job. The SWR is displayed briefly at > the end of a TUNE cycle. > > 73, > Don W3FPR > > On 3/26/2019 8:38 AM, Frank Krozel wrote: >> So getting used to my new to me K1. >> I am lucky to have the ATU internally (and am looking for the NB board!) but >> have a question for the folks that have one of these. >> How do you see your reverse power in the field? Do you use an external SWR >> meter? is there a way to get some LEDs out that can show you that you have >> a 1:1 after the ATU does it’s job? >> Am I missing something in the set-up. >> The K1 sounds amazingly like my K2 in CW sound, love the radio. Mine has >> the 4 band module in it! ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
