Discovered another anomaly...the digital SWR display changes from example,
1.1 to 1 with key down, to 1.0 to 1 with key up as left in its 'memory'
reading after sending is stopped. The LED SWR meter does not always
correspond perfectly with the digital display also now.
Roy K6XK
-----Original Message-----
From: Roy Koeppe
Sent: Sunday, March 31, 2019 5:15 AM
To: Elecraft Reflector
Subject: Re: [Elecraft] KPA1500 v. 2.10
Thanks for that report Roy. Notice the same defect here in the digital
display. I have only worked CW mode so far, and the power reading is erratic
and varies with 'duty cycle' -- a string of dots causes a very low reading,
while a string of dashes is more accurate and less erratic. Do hope a
correction is provided for us soon.
73, Roy Koeppe K6XK
-----Original Message-----
From: Roy Morris, Jr. via Elecraft
Sent: Saturday, March 30, 2019 10:57 PM
To: Elecraft Reflector
Subject: [Elecraft] KPA1500 v. 2.10
After loading v.2.10 the LEDs seem to show the correct power level at or
near the 1500 watt level. At reduced power levels the LEDs stream faster
but seem to also show the correct power level.The blue display window does
not show the correct power level. It consistently shows a very low power
level. Roy Morris W4WFB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
