If you go into the K3S CONFIG menu to LIN OUT the normal value is 10.
I suggest you back this down to 5. This will then allow the Windows 7
Pro sound card slider to operate near mid range thus 0 dB or 50%
depending on how it is displayed.
73
Bob, K4TAX
On 4/3/2019 4:50 PM, HP wrote:
Is here any way in W7 to change the RX level when using the built in USB K3S
sound card . The W7 slider
goes to -10dB with a lot of care but next tap is -192 dB- In WSJT this means I
have LIN out set to 001 and
still a bit too high .?
Hank K7HP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
