A follow-up;
While I still would like to buy an excess KAT3A for my K3 & if you have one, please contact me off-list. It turns out my KAT3A is now working perfectly at this time Before I packed it up to send back for repair I looked at the socket and noticed they were not gold pins, only the male pins on the main board are gold. I doubt there would be corrosion so soon but what's to lose? I dripped some Deoxit 100 in and let it set a few minutes, then squirted regular 15% deoxit with its 85% lube, cleaned and reinstalled it. The KAT3A is now working perfectly on 160 again and as before, all the other bands are also working. I emailed Elecraft to let them know I don't need the RMA and won't be sending it in. Glad they were there and willing had I needed to get it repaired. 73 all, Gary KA1J > Looks like I need a replacement KAT3A > tuner. Weighing the cost of > repair/replacement, I wonder if anyone has > one that they did not use, are not > needing? > > If so, please contact me off list with the > details. > > 73, > > Gary > KA1J > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html