Doug,
The SignaLink has both a soundcard and a USB to Serial port adapter. Be
certain that the proper COM port and soundcard are selected in the data
mode application. The K3 RS232 menu parameter should be set to 38400
and that same rate available in the COM port and the software application.
73,
Don W3FPR
On 4/15/2019 10:03 AM, Doug Turnbull wrote:
Dear OMs and YLs,
I am going to help a friend get onto FT8. He has a new Tigertronics
SignaLink, with the header for the K3 and appropriate cables for the K3.
This however does not in and of itself provide the ability to shift band or
frequency in the case of Fox Hound mode.
Is it correct to say that a cable from the K3 RS232 port possibly via
the P3 to the PC is all that is required to gain this frequency shifting
capability. The software being used other than what comes with the
SignaLink is standard WSJTX Version 2.? from K1JT's stable.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
